10 × 12 ft kitchen layout
A 10 × 12 ft kitchen is 120 sq ft (11.15 m²), with 44' (13.41 m) of wall around it. Everything below is worked out from those dimensions rather than written for a room in general — the plan is to scale, and the furniture is measured against the real walls.
10 × 12 ft kitchen in numbers
- Floor area
- 120 sq ft
- 11.15 m²
- Perimeter
- 44'
- 13.41 m
- Longest wall
- 12'
- 3.66 m
- Wall area at 2.4 m
- 28.8 m²
- door and window deducted
Planning a kitchen
A kitchen is the one room where the layout is a workflow, not an arrangement. Everything you do moves between the fridge, the sink and the hob, so the distances between those three decide whether cooking feels efficient or exhausting. Units come in fixed sizes, which makes the planning arithmetic unusually strict: base units are 600 mm deep and come in 300 mm increments, worktops overhang by about 20 mm, and appliances are almost all 600 mm wide. The room's own dimensions then decide which of the standard layouts is available to you — galley, L-shape, U-shape, or island — because each one needs a specific minimum walkway that does not shrink to fit.
A small or galley kitchen
A room this size is a galley or an L, and it can be an extremely good one — galley kitchens are the most efficient layout there is, because everything is within a step. The number that decides it is the gap between opposite runs of units: 1000 mm is the workable minimum for one cook, 1200 mm lets someone pass behind you, and below 900 mm you cannot open the oven and the dishwasher at the same time. With 600 mm units on both sides that means the room needs to be at least 2.2 m wide for a double galley; narrower than that and you run units down one side only and put the table or tall storage opposite. Keep the sink and the hob on the same run if you can, with at least 300 mm of worktop between them and 400 mm on the other side of the hob — that landing space is what you put a hot pan down on, and it is the first thing sacrificed in a small kitchen and the first thing regretted.
What fits in a 10x12 ft kitchen
Each piece is measured into a furnished room, not an empty one: it needs its own width plus enough clearance to get past it along the wall, its depth plus that clearance out into the room, and it is checked with a 600 mm run of units on the opposite wall already in place. Both pairs of walls are tried, so a long wall counts either way round. Tight means the piece is physically in the room but the clearance is not — you are edging round it.
| Item | Wall it needs | Depth it needs | In a 10x12 ft kitchen |
|---|---|---|---|
| Base unit run (3000 × 600) | 4.00 m | 2.20 mincl. 1000 mm clearance and 600 mm opposite | Tight1.46 m spare |
| Tall fridge-freezer (600 × 650) | 1.60 m | 2.25 mincl. 1000 mm clearance and 600 mm opposite | Fits1.41 m spare |
| Cooker or range (600 × 600) | 1.60 m | 2.20 mincl. 1000 mm clearance and 600 mm opposite | Fits1.46 m spare |
| Dishwasher (600 × 600) | 1.60 m | 2.20 mincl. 1000 mm clearance and 600 mm opposite | Fits1.46 m spare |
| Island (1800 × 900) | 3.80 m | 3.50 mincl. 1000 mm clearance both sides and 600 mm opposite | Tight0.16 m spare |
| Table for four (1200 × 800) | 2.70 m | 2.90 mincl. 750 mm clearance both sides and 600 mm opposite | Fits0.76 m spare |
Clearances that decide the layout
- Between opposite runs of units1000 mm
- Enough to turn, crouch and open a low door. 1200 mm if anyone needs to pass behind.
- In front of an appliance door1000 mm
- An oven door is around 500 mm deep when open, and you have to stand behind it holding something hot.
- Around an island1000 mm
- On every side that is worked from or walked past.
- Worktop beside the hob400 mm
- Landing space for a hot pan. 300 mm on the other side is the minimum.
Materials for a 10x12 ft kitchen
Quantities from the real floor and wall areas, with the waste allowance already added. Estimates to plan with — measure again before you order.
| Flooring | With waste | Boxes |
|---|---|---|
| Laminate2.22 m² a box, 10% waste | 12.3 m² | 6 |
| Engineered wood1.8 m² a box, 10% waste | 12.3 m² | 7 |
| Vinyl tile (LVT)3.34 m² a box, 10% waste | 12.3 m² | 4 |
| Ceramic tile1.44 m² a box, 15% waste | 12.8 m² | 9 |
- Paint — about 5 litres for two coats on 28.8 m² of wall, at a 2.4 m ceiling with a door and a window deducted.
- Skirting — 12.59 m once one doorway is taken out of the perimeter.
- Ceiling — the same 11.15 m² as the floor, so roughly 2 litres for two coats.
Change the numbers in the flooring calculator or the paint calculator, both already filled in with this room’s dimensions.
Common questions
- How big is a 10x12 ft kitchen?
- 120 sq ft (11.15 m²), with a perimeter of 44' (13.41 m). The walls are 10' (3.05 m) and 12' (3.66 m).
- How much flooring does a 10x12 ft kitchen need?
- 12.3 m² including a 10% waste allowance, which is 6 boxes of laminate at 2.22 m² a box. Tile and engineered wood come in different box sizes, so check the pack before ordering.
- How much paint does a 10x12 ft kitchen need?
- About 5 litres for two coats on the walls, based on a 2.4 m ceiling, 28.8 m² of wall after a door and a window are deducted, and 12 m² of coverage per litre.
- Will a table for four fit in a 10x12 ft kitchen?
- Yes. It needs 2.70 m of wall and 2.90 m out into the room once its clearance is counted, and this room gives you 0.76 m to spare on top of that.
- How wide does a kitchen need to be for units on both sides?
- About 2.2 m. Two 600 mm runs of base units leave 1000 mm between them, which is the workable minimum for one person. At 2.4 m you get a 1200 mm gap and two people can use the kitchen at once.
- How much space do you need around a kitchen island?
- 1000 mm on any side you work from, and 1200 mm where people walk past a working cook. With a typical 1800 × 900 mm island that means the room needs roughly 3.8 × 2.9 m of clear floor for the island zone alone, on top of the perimeter units.
- What is the kitchen working triangle?
- The route between the fridge, the sink and the hob. Each leg should be between 1.2 m and 2.7 m, and the three legs together should total under 8 m. It is a rule of thumb rather than a regulation, but kitchens that break it badly are noticeably tiring to cook in.
- How deep are kitchen units?
- Base units are 600 mm deep with a worktop of 600 to 650 mm, and wall units are 300 to 350 mm. Wall units are hung so their underside is about 450 to 600 mm above the worktop, which is the clearance you need to use the space underneath.
Other kitchen sizes
The same size as another room
Before you draw it: how to measure a room and how to draw a floor plan to scale. Real rooms are never exactly 10 × 12 ft — draw yours from scratch if the walls do not match.